CREAM SWEATPANTS SET
CREAM SWEATPANTS SET
Ehite Heavyweight Oversized Sweatpants Set: Engineered for an oversized and relaxed fit. For a fit that's closer to standard, consider going a size down.
This set includes the CREAM HEAVY TEE and CREAM SWEATPANTS.
| Size | XS | S | M | L | XL | 2XL |
|---|---|---|---|---|---|---|
| Length | 72 | 74 | 76 | 78 | 80 | 82 |
| Chest | 112 | 116 | 120 | 124 | 128 | 132 |
| Shoulder | 57 | 57.5 | 58 | 59.5 | 61 | 61.5 |
| Sleeve Length | 23 | 23.5 | 24 | 24.5 | 25 | 25.5 |
Note: The measurements provided are for the product laid flat. Actual product measurements may vary by up to 2.5 cm.
How to Measure
Chest: Place the fabric tape 2.5 cm below the armpit, straight across front. Measure from outside edge to outside edge. The measurement in the size chart refers to twice the width of the chest when laid flat.
Shoulder: Place the fabric tape from shoulder point to shoulder point, straight across back. Measure from armhole seam to armhole seam.
Length: Take the measurement straight down from high point shoulder to the bottom edge of the garment.
Sleeve Length: Measure the length from the tip of the shoulder to the bottom edge of sleeve, including cuff.
| Size | S | M | L | XL |
|---|---|---|---|---|
| Outseam | 104 | 106 | 108 | 110 |
| Waist | 68 | 73 | 78 | 84 |
| Hip | 112 | 117 | 122 | 128 |
| Leg Opening | 26 | 27 | 28 | 29 |
Note: The measurements provided are for the product laid flat. Actual product measurements may vary by up to 2.5cm.
How to Measure
Waist: Measure across the top edge of the waistband from one corner to the other. The measurement in the size chart refers to twice the width of the waist when laid flat.
Hip: Measure straight across the widest area of the seat of the pants (usually 22.5cm down from the top of the front waistband). The measurement in the size chart refers to twice the width of the hip when laid flat.
Outseam: Run the fabric tape from the top of the waistband, along the outer side of the pant leg, all the way down to the bottom of the hem.
Leg Opening: Lay the bottom cuff flat and measure the width of the cuff. The measurement in the size chart refers to twice the width of the leg opening when laid flat.
Wash on the reverse side with neutral detergents. Do not soak, expose to the sun, and bleach. Iron, steam, or tumble dry at low temperature(max 30℃ or 90℉).
